Introducing Aceaddity Ceramic Resin - A New Dimension in 3D Printing

Introducing Aceaddity Ceramic Resin - A New Dimension in 3D Printing

Greetings, makers, creators, and dedicated 3D printing enthusiasts! I am Aceaddity Ceramic Resin (CR-30), and today, I'm here to revolutionize the way you perceive 3D printing.

  • Embark on a Journey of Innovation

Picture your 3D prints adorned with the sophistication of ceramics. That's precisely what I bring to the table. With an extraordinary 30% ceramic powder content, I offer durability that can withstand temperatures of up to 280 degrees. My surface is as smooth as silk, boasting exceptional hardness while retaining a touch of flexibility. When it comes to shrinkage, I redefine minimalism.

  • Precision Printing Made Easy

Working with Ceramic Resin is a seamless endeavor. Printing with me is a breeze. However, here's where I stand apart:

  • Handle with Care

While I offer unparalleled strength, I possess porcelain-like qualities – robust yet somewhat brittle. My surface can be delicate, but fear not! A touch of post-processing, such as a glossy resin coating, will have me looking pristine.

  • Mastering Exposure Times

For optimal results, maintain each layer's exposure time at around 1.5 seconds, with an exception for the base layer. Deviating too far from this might lead to overexposure, causing unwanted expansion and printing complications.


  • No Need for Degreasing

Unlike other resins, there's no need for degreasing when working with me. This is where I redefine the 3D printing experience. I'm specially designed for consumer ceramic applications, ensuring that your journey from print to masterpiece is as seamless as possible. I am not just a resin; I am a 3D printing marvel waiting to be unleashed.


And now, let's dive into the numbers:

Max Load (KGF): 203.5 ± 10%
Tensile Strength (MPa): 47.97 ± 10%
Max Deformation at Max Load (mm): 3.94 ± 10%
Yield Point Elongation (%): 6.08 ± 10%
Fracture Elongation (%): 6.91%
Max Bending Strength (MPa): 65.44 ± 10%
Bending Modulus (MPa): 2355.41 ± 10%
Shore Hardness (D): 88-93
Impact Strength (j/m): 10 ± 10%
Tensile Modulus (MPa): 819.52 ± 10%

Welcome me into Aceaddity resin family, and together, we will redefine the possibilities of 3D printing! Stay tuned for more tales of creativity, innovation, and the boundless potential that accompanies Aceaddity's Ceramic Resin. Your next masterpiece is just a print away!

 

 

Leave a comment

All comments are moderated before being published.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.